Alicat Mass Flow Controllers
The Alicat Scientific MC-series Mass Flow Controllers can control up to 30 gases. One gas should be specified for the primary gas calibration. The MC-series mass flow controllers can be powered by 9v battery or 115V/60Hz AC adaptors. Fully controllable via the on-board display, Alicat Meters can also be controlled through FlowVision software on a PC. The MD8DB9 cable is included with the FlowVision Software.
For use with a system, a 6 ft. cable(DC-61) or a 25 ft. cable(DC-251) can be purchased in the communication cable section. Only one connector is supplied with the cable (the 9 pin Din connector to connect to the Alicat MFC). The other end is left unsoldered so you may furnish your own connector.
Visit www.alicat.com
for more information and product documentation.
Alicat MC-Series Mass Flow Controller
- 0.5SCCM - 3000SLPM Flow Range
- 100ms
- 0.2% of Full Scale Accuracy
Alicat MCS-Series Mass Flow Controller for Aggressive Gas Systems
- 0.5SCCM - 3000SLPM Flow Range
- 100ms
- 0.2% of Full Scale Accuracy
