Thermal Evaporation Power Supply 3000 Watts

The T3000 is designed specifically to power resistive evaporative sources, which are used in the deposition of thin film coatings. It has been designed to cover the class of resistive load devices requiring low voltage and high current at power levels up to 3kW. Several methods for controlling output power are available to the user. In the simplest arrangement, a user supplied DC voltage is applied to control the output current to the load. A current feedback loop in the T3000 serves to stabilize output load current to be in proportion to this DC input control voltage. The next level of sophistication is to use the T3000 in conjunction with the Sycon RS-3000 controller. This unit allows the user to input desired current levels with corresponding rate of rise times to control load thermal stresses and to monitor set points and output power levels. The controller also provides automatic shutdown to govern various failure modes, such as an open load condition. The T3000 is also directly compatible for use with industry standard thickness/rate controllers, such as the Sycon STC class products. The most sophisticated configuration employs the T3000 with the RS3000 and STC-2002. This configuration allows setting of specified deposition rates through automatic control of output power to the thermal source, control of PID loop dynamics and provides set points and output power level as well as other monitoring and control functions. The T 3000 and RS-3000 give you the power and control you need for your thermal evaporations.

• 3000 Watts @ 230 VAC Input
• 5 Volts @ 600 Amps (rms) or 10 Volts @ 300 Amps (rms)